Removing And Installing The Filter Silencer - ABB HT842305 Operation Manual

Operation Manual / TPL85-B14/-B15/-B16
8 Disassembly and assembly / 8.4 Removing and installing the filter si-
lencer
Tightening torques [Nm]

8.4 Removing and installing the filter silencer

Removing the filter silen-
cer TPL77 - 91-B
© Copyright 2018 . All rights reserved.
Tightening screws
Screws for fastening individual parts to
the filter silencer
M10
30
Tighten all screws of bottom parts (1) and (2).
u
Tighten all screws of side parts (3, 4, 7 and 8) and flanges (10 and 11).
u
Tighten all screws of circumferential parts (5, 6 and 9).
u
Compensator
Fit bellows (C) to silencer casing using frame (F), screws (S) and nuts
u
(N).
Remove insulation where necessary.
u
HZTL2491_EN
Screws for fastening indi-
vidual parts
M8
25
Revision C August 2018