Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
9 Short-term turbocharger shut-down / 9.2 Locking the rotor
9.2.2 Fitting locking device
Table of tools
Table of tightening
torques [Nm]
© Copyright 2018 . All rights reserved.
Remove filter silencer and internal part of compressor casing com-
u
plete with wall insert and diffuser. (See chapter Disassembly and as-
sembly.)
Fix partition wall using press-off tools (90920) and screws.
u
Fit locking device (90020) in accordance with following illustrations.
u
Make sure the intermediate rings, the spacer ring and the adapter ring
are fitted correctly.
All parts must be kept clean and free from grease.
Part number
74027
90020
90920
94001 / 94002
94003
94004
94006 / 94008
94031
94032
The locking flange (94003) must be fitted to the compressor wheel us-
ing at least 9 screws (94008), tightened according to the Table of tight-
ening torques.
Part number
94006
94008
HZTL2491_EN
Description
Hexagon nut
Locking device
Press-off tool with screw
Intermediate ring
Locking flange
Adapter ring
Hexagon-head screw
Spacer ring
Washer
TPL85-B14/-B15/-B16
M12
75
M12
60
Revision C
August 2018
Advertisement
Table of Contents
