Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
8 Disassembly and assembly / 8.6 Removing internal part of com-
pressor casing
© Copyright 2018 . All rights reserved.
Slightly raise the compressor casing internal part (76000) along with
u
the wall insert and diffuser using the lifting device (90190).
Use a second set of lifting gear to carefully move the compressor cas-
u
ing internal part (76000) into a vertical position.
Set down the casing with the flange (F) on an underlay.
u
WARNING
Make sure that the underlay does not slip.
Allow the compressor casing internal part to rest only on the flange
u
(F).
Check underlay and adjust if necessary.
u
HZTL2491_EN
Revision C
August 2018
Advertisement
Table of Contents
