Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
5 Maintenance / 5.2 Cleaning the filter silencer
Punch out guide tube
Fitting complete cleaning
pipe
© Copyright 2018 . All rights reserved.
Hammer guide tube (03) free from peen fixing using a bolt (diameter
u
= 16 mm) and withdraw it.
Replace damaged parts of the complete cleaning pipe with original parts
from ABB Turbo Systems.
Refit guide tube (03) and peen fix it after putting insert units (E) in
u
place.
Fit feed pipe (02) and screw onto injection pipe (01) using connector.
u
HZTL2491_EN
Revision C
August 2018
Advertisement
Table of Contents
