Table of Contents
Advertisement
Using your extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.
A
Fig. 1
Control Panel
A - Power off button
B - Speed level buttons
C - Light button
To switch the extractor light on or off
•
Press the light button (C).
To switch on the extractor or to change the speed at any time
when the extractor is running
•
Press the relevant speed button (B) for the first, second, third or
fourth speed level as required.
•
Press and hold the relevant speed button (B) to activate the timer
countdown for that speed. This timer lasts for approximately 10
minutes before switching the speed off. It can be deactivated at any
point by pressing the same speed sensor.
To switch the extractor off
•
Press the power off button (A).
6
B
7
C
Advertisement
Table of Contents
