Using Your Extractor - CDA CST61SS Directions For Installation, Use And Maintenance

Using your extractor

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15 minutes
after the end of cooking.
Control Panel
A
Fig. 1
A - Neon Indicator
B - Light button
C - Off button
D - Speed level buttons
To switch the extractor light on or off
• Press button "B".
To switch on the extractor or to change the speed at any time
when the extractor is running
• Press the relevant "D" button for the first, second or third speed
level as required. The neon light "A" illuminates to show that the
extractor is running.
B C D
5