Using Your Extractor - CDA EDD62 Installation, Use And Maintenance Manual

Using your extractor

For best performance, you should switch on the extractor 15
minutes before starting cooking and for approximately 15 minutes
after cooking.
On
Fig.1
Control panel
Touch the on key for 2 seconds to raise the extraction panel. Once the
extraction panel has risen halfway, the fan will start working at low speed
Touch the off key for 2 seconds to lower the extraction panel. Once the
extraction panel has descened halfway, the fan will stop operating
Press the light key to switch the lights on or off. Once the extraction
panel descends to halfway, the lights will switch off automatically
Touch the low key to start the fan at the lowest setting. Touch again to
turn off the fan. Touching either the middle or high keys will change the
fan setting
Touch the middle key to start the fan at the middle setting. Touch again
to turn off the fan. Touching either the low or high keys will change the
fan setting
Touch the high key to start the fan at the highest setting. Touch again to
turn off the fan. Touching either the low or middle keys will change the
fan setting
Timer Function
Touch any of the fan setting keys for 3 seconds when the
appliance is on and the key will flash. The extractor will enter
timer mode and will automatically stop after 15 minutes.
O Light Low Middle High
Instruction Manual | 5