Using Your Extractor - CDA CTE9 Installation, Use And Maintenance Manual

Using your extractor

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15 minutes
after the end of cooking.
Controls
A - Lamp switch B - Left speed switch C - Right speed switch
B C
A
Fig. 1
To switch the extractor on and adjust speed
Slide open the canopy and activate either switch B or switch C (Fig. 1).
Switch B, the left speed switch, has three positions; speed 1, speed 2
and off. Switch C, the right speed switch, has two positions; speed 3
and off.
To switch the extractor off
Simply close the sliding canopy (the extractor will resume when the
canopy is re-opened). However, if leaving the appliance off for a long
time, ensure that the left speed switch is in the off (centre) position and
the right speed switch is in the off position.
6