Table of Contents
Advertisement
Using your extractor
For best performance, you should switch on the extractor
15 minutes before starting to cook and leave it to run for
approximately 15 minutes after the end of cooking.
Fig. 1
Control Panel
A - Power off button
B - Speed level buttons
C - Light button
To switch the extractor light on or off
•
Press button "C".
To switch on the extractor or to change the speed at any time
when the extractor is running
•
Press the relevant "B" button for the first, second or third speed
level as required.
To switch the extractor off
•
Press the "A" button.
Important: The lighting is intended to be used for the duration of
cooking only. The lighting should not be used for ambient lighting
purposes.
6
A
B
C
Advertisement
Table of Contents
