Table of Contents
Advertisement
Using your extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15 minutes
after the end of cooking.
Control Panel
Please enter the details on the appliance rating plate below for reference,
to assist CDA Customer Care in the event of a fault with your appliance
and to register your appliance warranty.
Fig 1.
To switch the extractor light on or o
Press the "Lamp" indicator button.
To switch on the extractor or to change the speed at any time
when the extractor is running
Press the relevant button for the "Low", "Mid" or "Max" speed level as
required.
To switch the extractor o
Press the "O " button.
IMPORTANT: THE LIGHTS ON YOUR EXTRACTOR ARE TO BE USED
ONLY FOR THE DURATION OF COOKING. THEY ARE NOT FOR USE
AS AMBIENT LIGHTING.
IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEANING OF
THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE ELECTRICI-
TY SUPPLY.
6 | Instruction Manual
Advertisement
Table of Contents
