Using Your Extractor - CDA EVS90BL Installation, Use And Maintenance Manual

Using your extractor

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking (you can use the timer function for
this).
1 - On/off button
2 - Speed increase button
3 - Speed decrease button
4 - Light button
Switching the extractor on/off and setting the speed level
- Press the on/off button. The appliance will switch on at speed level 1.
- To increase the speed level touch the speed increase button. Red
LED indicators will illuminate according to the set speed.
- To reduce the speed level touch the speed decrease button.
- To switch the extractor off, touch the on/off button.
Extractor lights
- To switch the lights on and off, press button 4 on the remote control.
Please note: The lights are not intended to provide downlight
illumination.
6
Fig. 1
1
2
3
4