Using your extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking (you can use the timer function,
detailed on page 7, for this).
Control Panel (Fig. 1)
A - On (speed 1) and off button
B - Speed 2 button
C - Speed 3 button
D - Intensive speed button
E - Light button
To switch the extractor lights on or off
•
Press the light button (E).
To switch on the extractor and change the speed
•
Press button 'A' to switch the unit on. Adjust the speed using buttons
'B', 'C' & 'D'.
•
You may notice that the intensive speed (speed 4) indicator flashes
when it is selected. This is not a fault (see page 20 for more
information).
0/1
A
Fig. 1
6
2
3
B
C
4
D
E