Table of Contents
Advertisement
Do not use silicone sealant to secure the hood to the wall.
•
You must be able to isolate the extractor from the mains electrical
•
supply after installation.
Steam cleaners must not be used when cleaning this appliance.
•
The performance of your extractor will vary depending on a
•
number of factors. These include: type of extraction, length of
ducting, room volume, ventilation available and cleanliness of the
filters.
Using your extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.
Fig. 1
Control Panel
A - Light key
B - Decrease speed key
C - Display
D - Increase speed key
E - Timer key
To switch the extractor light on and off
•
Touch key "A".
A
B
C
D
E
5
Advertisement
Table of Contents
