Using your Extractor
For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15 minutes
after the end of cooking.
Control Panel
A - Power off button
B - Speed level buttons
C - Light button
Fig. 1
To switch the extractor light on or off
•
Press button "C".
To switch on the extractor or to change the speed at any time when
the extractor is running
•
Press the relevant "B" button for the first, second or third speed level
as required.
To switch the extractor off
•
Press the "A" button.
IMPORTANT SAFETY WARNING: The extractor's rail is for
decorative purposes only. Do not hang anything from the rail, in
particular items made from combustible materials (e.g. towels).
A
B
C
5