Start Measurement - Fluke VIBXPERT II User Manual

Start measurement

• Click on 'Machine template' in the start screen.
A list of the available machine templates appears (see below).
Machines where measurements have already been carried out
appear subordinate to the associated template. The number of
the measured measurement location and the total number of
measurement locations is indicated in the right column ('Done')
for each machine.
The info field for the highlighted machine at the bottom shows
when the corresponding template was loaded into the data
collector and when the last measurement was carried out.
To continue the measurement on a machine, click on the corre-
sponding subordinate machine.
• Click on the template that you want to use for the measurement.
The 'Machine description' dialog appears where a name for the
new machine is specified.
• If you do not want to enter any further information, press the
MENU key and click on 'OK' to accept the name.
• Otherwise press the MENU key, click on 'Details' (see below) and,
if necessary, enter the necessary data as follows:
- Position the cursor in the corresponding text field and press
'Enter' to open the text editor.
- After entering the data, press the MENU key and click on OK.
You can change the machine description at any time.
Measurement - Machine template

Note
Left:
Enter machine details
Right:
Machine template list
Template
Machine
Info field
3-15