Table of Contents
Advertisement
1-10
Safety and operating notes
Safety and operating notes
Read this section carefully, paying especially close attention to the
safety notes, before working with the device.
Symbols used
This symbol warns of operating errors that can
lead to data loss or equipment damage.
Attention!
This symbol denotes information and tips on
operating the data collector.
Note
Intended use
- The measurement device may only be used for the measurement
of machine signals in industrial environments while taking into
consideration the technical specifications (see " Technical data").
- Transducers and cables may be used only for their respective
intended uses as defined in the corresponding sales leaflets.
Any other use shall not be considered an intended use and is
impermissible. Incorrect or impermissible use and failure to observe
the instructions in this manual result in a loss of warranty from
PRÜFTECHNIK.
Conformity
The product complies with the relevant European directives.
The declaration of conformity is available as a PDF and may be
downloaded from the PRÜFTECHNIK website: www.pruftechnik.com
Advertisement
Table of Contents
