Table of Contents
Advertisement
3-34
Triax sensor
Triaxial sensor
magnetic holder VIB 6.657.
Triaxial sensor
Connect to VIBXPERT II with
cable VIB 5.336
One measurement location for every
measurement direction
Triaxial sensor (Route)
A triaxial sensor simultaneously records machine vibrations in three
axes (X/Y/Z). VIBXPERT supports the use of a triaxial sensor in the
route as follows:
- The three axes of the sensor are mapped in the database with
the aid of three measurement locations. The assignment is
created in the OMNITREND software.
- In OMNITREND, a sensor of type 'ICP' must be assigned to the
measurement tasks.
- Because VIBXPERT only has two measurement channels, a
special cable adapter (VIB 5.336) is required that groups the
second and third signal line (Y/Z) on channel B.
- The measurement tasks for the X and Y directions are grouped by
VIBXPERT into a 1+1 measurement and simultaneously recorded
in channels A and B. VIBXPERT then records the measurements
in the Z axis.
Mount with
Advertisement
Table of Contents
