Page 2
LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is two years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
Table of Contents Title Page Introduction ........................1 How to Contact Fluke ....................2 Safety Information ......................2 Before You Start ......................5 Tilt Stand ........................6 Hanger Accessory ..................... 6 Storage .......................... 7 Power Supply ........................ 7 How to Charge Battery ....................8 Accessories ........................
Page 4
Battery Replacement ....................37 Calibration ......................... 37 Service and Parts ......................38 Energy Analyze Software ....................40 System Requirements ....................40 PC Connections ......................41 Wiring Configurations..................... 42 Specifications ......................... 45 MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 5
List of Tables Table Title Page Symbols ..........................4 Accessories .......................... 9 Front Panel ........................... 12 Connector Panel ........................13 Power/Battery Status ......................16 Replacement Parts ....................... 38 MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Harmonic Distortion: Total Harmonic Distortion of location. Voltage and Current The Logger makes these measurements: Fluke Energy Analyze software is included with the Product for a thorough energy analysis and professional Basic Measurements: Voltage (V), Current (A), report of the measurement results.
1730 Users Manual How to Contact Fluke Safety Information To contact Fluke, use one of these telephone numbers: A Warning identifies hazardous conditions and procedures that are dangerous to the user. A Caution USA: 1-800-760-4523 identifies conditions and procedures that can cause Canada: 1-800-36-FLUKE (1-800-363-5853) damage to the Product or the equipment under test.
Page 11
Do not use a current measurement as an indication that a circuit is safe to touch. A voltage measurement is necessary to know if a circuit is hazardous. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Directive Annex I, this product is classed as category 9 “Monitoring and Control Instrumentation” product. Do not dispose of this product as unsorted municipal waste. Go to Fluke's website for recycling information. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Hang the Logger with power supply attached (use two magnets) Hang the Logger separately (use two magnets) Hang the power supply separately (use one magnet) hcf058.eps Figure 2. Hanger Accessory MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Logger from the external source (after initial power on, the power button turns on and turns hcf031.eps off the Logger) Figure 3. Power Supply and Battery recharges the battery MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
The clock resets when the battery is completely discharged. When the Logger shuts off because of low battery, enough battery capacity is available to back up the real-time clock for up to 2 months. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
6000 Thin-Flexi Current Probe (single) i1730-flex6000/3PK 4357423 Set of three Thin-Flexi Current Probes 6000 A 90.5 cm (36 in) Fluke-1730 Test Lead, 0.10 m 4344653 Fluke-1730 Test Lead, 2 m 4344675 MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
10 k power applications. 10 nF UI:A v(t) A correctly formed R-coil, with equally spaced windings, is LF347 largely immune to electromagnetic interference. hcf028.eps Figure 4. R-Coil Operation Principle MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
This lock is available from most electronics and computer suppliers. hcf025.eps Figure 5. Test Leads with Color Coding MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
100-500 V 50/60 Hz 50 VA USB connector Mini-USB connector Extension Port Aux 2 connector Aux 1 connector DC Power Input hcf021.eps Figure 7. Connector Panel MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Europe/UK (New STD 4280531) UK (4280554) shown in Figure 8. China (4280568) hcf022.eps Figure 8. Decal for Connector Panel MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Logger. 2. Move the slide-cover on the power supply to access the safety sockets and connect these sockets with the voltage input sockets A/L1 and N. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Push or Push to turn on the display. below the display label to start that function. These labels also work as touch targets. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Change Configuration menu. Study type Examples of these diagrams are shown on the following Topology pages. Nominal voltage (for load studies only) Current range Scale factors for external VTs or CTs MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 27
Example: Used in Norway and in some hospitals. This would be the connection at a branch circuit. A/L1 hcf040.eps Energy Study A/L1 hcf042.eps Energy Study A/L1 hcf041.eps Load Study (no voltage measurement) hcf041.eps Load Study (no voltage measurement) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 28
Typical commercial building power. A/L1 A/L1 B/L2 B/L2 C/L3 hcf045.eps hcf043.eps Energy Study Energy Study A/L1 A/L1 B/L2 C/L3 B/L2 hcf046.eps hcf044.eps Load Study (no voltage measurement) Load Study (no voltage measurement) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 29
A/L1 A/L1 B/L2 C/L3 B/L2 C/L3 hcf049.eps Energy Study hcf047.eps Energy Study A/L1 A/L1 B/L2 C/L3 B/L2 C/L3 hcf050.eps Load Study (no voltage measurement) hcf048.eps Load Study (no voltage measurement) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 30
A/L1 A/L1 B/L2 C/L3 B/L2 C/L3 hcf053.eps Energy Study hcf051.eps Energy Study A/L1 A/L1 B/L2 C/L3 B/L2 C/L3 hcf054.eps Load Study (no voltage measurement) hcf052.eps Load Study (no voltage measurement) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 31
The current sensor direction can be corrected in the case of a highly fluctuating current. digitally in the Connection Verification screen. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 32
Verify Connection touch button to confirm the connection. The verification detects: Too low signal Phase rotation for voltage and current Inverted current probes Wrong phase map MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Load Study and Energy Study. This Configuration screen also contains the measurement configuration parameters such as Topology, current range, voltage, and current ratios. See page 28 for more information about MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 34
Identify duty cycle of frequently switching loads Energy cost calculation of production steps The Logger recommends an interval based on the duration to get the best balance between resolution and data size. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 35
From the Logger home screen you have access to: This value is not available for load studies. V, A, Hz, + (A, Hz, + for load studies) Power Energy Details MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 36
High maximum values on Currents can be an indicator for Use (Reverse Power/Forward Power) to toggle tripping circuit breakers. between Top-3 forward and Top-3 reverse values. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Energy cost. The currency can be configured in 1. Push to review the logging session. See View instrument settings. See page 32 for more information. Logging Sessions for more details. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
4. Use (Delete) to delete the selected screen. Push to delete all screens. 5. Push or (Save All to USB) to copy all screens to an attached USB flash drive. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 39
To set the date format: 6. Push to confirm the selection. 1. Push to highlight the Date Format target. 2. Push . 3. Select one of the available date formats. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Touch screen calibration is not available when a logging session is active. 6. Enter a three-letter currency code with the keyboard and accept with . 7. Push to confirm the selection. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
4. Push to highlight or touch Instrument A firmware update deletes all user data such as Information target. measurement data and screen captures. 5. Push to exit the screen. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Power Supply with the Logger. 2. Connect the power cord into the power supply. The Logger starts up in <20 seconds and the Setup Wizard starts. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Based on 7. Connect the voltage test leads to neutral, phase A/L1, knowledge of the electrical supply in the facility, determine phase B/L2, and phase C/L3. the configuration. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 44
- 15 minutes for demand interval 16. Push Start Logging. You can review the live data with or . Return to the active logging session with . Once the MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Product. and calibration of your Logger. The recommended calibration cycle is 2 years. Use only specified replacement parts. More information about how to contact Fluke is on page 2. Have an approved technician repair the Product. How to Clean Caution ...
Test Lead 2 m Red, 1000 V Cat III 4382591 Color-coded Wire Clips 1 set 4394925 USB Flash Drive 4298561 Users Manual on USB Flash Drive MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 47
Energy Logger Service and Parts hcf060.eps Figure 9. Replacement Parts MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Users Manual Energy Analyze Software System Requirements The computer hardware requirements for the Energy The 1730 Energy Logger includes the Fluke Energy Analyze software are: Analyze software that lets you do tasks from a computer. Free Hard Disk space 50 MB, You can: >10 GB (for measurement data) recommended...
Logger as shown in Figure 10. 3. Install the Energy Analyze Software. hcf024.eps Figure 10. Energy Logger to PC Connections See the Energy Analyze Online Help for information about how to use the software. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 51
Measured values [1] Simulated in load studies if U is specified [2] Secondary displayed values [3] Not available in load studies Calculated values ○ Simulated values (derived from phase 1) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 52
Measured values [1] Simulated in load studies if U is specified [2] Secondary displayed values [3] Not available in load studies Calculated values ○ Simulated values (derived from phase 1) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 54
3-Φ delta open leg, Currents only (load studies) Interfaces USB-A ............. File transfer via USB Flash Drive, Firmware updates, max. supply current: 120 mA USB-mini ............Data download device to PC Extension port ..........Accessories MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 55
10 weeks >2 years 15 min 3.5 months >2 years 30 min 7 months >2 years [1] The number of possible logging sessions and logging period depends on user requirements. MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 56
40 mA to 4 A / 0.4 A to 40 A with 40 A clamp i40s-EL Bandwidth ( 3 dB) ..........1.5 kHz Scaling ..............1:1, variable Auxiliary Inputs Number of Inputs ..........2 Input Range ............0 to 10 V dc, 1 reading/s MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 58
Input Current: I > 10 % of Irange Primary conductor of clamps or Rogowski coil in center position Temperature Coefficient: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 59
% of range) of range) Working Voltage .......... 1000V CATIII, 600V CATIV [1] Reference Condition: Environmental: 23 °C ±5 °C, no external electrical/magnetic field, RH 65 % Primary conductor in center position MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 60
Temperature operating ......-10 °C to +55 °C Storage Altitude .......... 12 km (40,000 ft) (-14 °F to 131 °F) Warranty ............. 1 year Temperature, non-operating ....-20 °C to +70 °C (-40 °F to 158 °F) MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Page 61
Max Operating Altitude ......2000 m (6,500 ft) up to 4000 m (13,000 ft) derate to 600 V CAT II/300 V CAT IV Max Storage Altitude ......12 km (40,000 ft) Warranty ..........1 year MyFlukeStore 1.877.766.5412 www. .com Shop for Fluke products online at:...
Need help?
Do you have a question about the 1730/BASIC and is the answer not in the manual?
Questions and answers