Data Acquisition At The Vibronet Multiplexer - Fluke VIBXPERT II User Manual

Data acquisition at the VIBRONET multiplexer

For automatic data acquisition at many measurement locations of
the same type or hard-to-access measurement locations, VIBXPERT
and OMNITREND feature the function 'Multiplexer measurement'.
The respective measurement tasks are processed within a route or
as a machine template.
The measurement locations are combined by the VIBRONET field
multiplexer (VIB 8.306) on one string line and are measured
consecutively.
VIB 5.346 MUX
VIB 5.346
Only vibration measurements with Current Linedrive accelerom-
eters are possible.
Up to 6 multiplexers with a maximum of 54 measurement locations
are possible on one string line.
To connect VIBXPERT to a multiplexer you need the following:
• Connecting cable, VIB 5.346
• BNC connecting adapter, VIB 5.346 MUX
For RPM-dependent measurements (e.g. phase), you have to install
the sensor (VIB 6.631) at a suitable measurement location. RPM
measurements via multiplexers are not possible.
Multiplexer

Note
3-41