Table of Contents
Advertisement
2-36
Getting started - Update
Update
Technical developments and improvements to the firmware are
transferred to the device via an update. The current version can be
obtained from your PRÜFTECHNIK sales partner.
Preparation:
• Backup the measurement data into the OMNITREND database.
• Connect the device to the mains supply. Otherwise, the update
procedure will not start.
• Install the 'VIBXPERT update tool' on the PC under C:\Programs\
Pruftechnik\vibxpert\VxpUpdateTool.
Update procedure:
• Connect VIBXPERT to the network / or to the PC (USB).
• Switch on VIBXPERT.
• Start the 'VIBXPERT update tool'* on the PC and click on <Next>
to call up 'Step 2'.
• Set the 'Communication type' to 'Ethernet' (or 'USB').
• Only with network connection: Enter the IP address of the VIBX-
PERT and ensure that UPD port 55737 is enabled.
• Click on <Next>:
Advertisement
Table of Contents
