Table of Contents
Advertisement
4-8
Results
Amplitude, Envelope, Order
Trending, Trending envelope, Cepstrum
In-depth information is given in the
section 'Measurement Tasks' (Ch. 5).
Spectrum & time waveform
Additional information
Upper window pane is active
Spectrum, Cepstrum
The measurement result is displayed in the upper pane. The
measured time waveform is displayed in the lower pane during the
measurement. After the measurement, the following information can
be displayed:
- Max 10 (10 highest amplitudes in the spectrum)
- Alarms
- Frequency marker (only in Route / Template mode)
- Trending values (only in TrendingSpectrum)
- Trending bars (only in TrendingSpectrum)
- Time waveform measured
- Position of the main cursor
• Press the MENU key and select the 'Info' option.
• Click on the desired piece of information:
The data to be displayed by default after the measurement is set in
the display setup (see p. 4-18).
N ote
The active window pane is highlighted by a frame. Press the F key
to switch to the other window pane.
Info / Max 10
Lists the 10 highest amplitudes in the spectrum. Click on an entry
to set the cursor to the corresponding line of the spectrum. You can
sort the list for amplitude or frequency in ascending or descending
sequence. To do so, click on the respective column title.
Left:
Right:
Advertisement
Table of Contents
