Appendix; Menu Tree - Furuno FA-150 Operator's Manual

APPENDIX

Menu Tree

The example screens shown in this manual may not match the screens you see on your
display. The screen you see depends on your system configuration and equipment settings.
[MENU] key
MSG CREATE MSG
TX LOG
RX LOG
SENSOR STATUS (Display sensor status.)
INTERNAL GPS (Displays data about internal GPS receiver.)
USER SETTINGS
KEY BEEP ( ON , OFF)
ALARM BUZZER ( ON , OFF)
DISP RCVD MSG ( ALL , ABM, OFF)
RCVD MSG BUZZ ( ON , OFF)
LR MODE ( AUTO , MANUAL)
AUTO SORT ( ON ,OFF)
CPA/TCPA ALARM
INITIAL
SET MMSI (MMSI, IMO NO., NAME, C. SIGN)
SETTINGS
SET INT ANT POS.
SET EXT ANT POS.
SET SHIP TYPE (Type no.)
SET I/O
PORT
SET PC
PORT
SET LAN
PORT*
(Continued on
PRIORITY
next page)
* Shown when
optional LAN kit
is installed.
SET MSG TYPE
ADRS TYPE ( BROAD CAST , ADRS CAST)
SET MSG
MMSI
SEND MSG
MSG TYPE (NORMAL, SAFETY )
CHANNEL ( ALTERNATE , BOTH A & B, A, B)
CPA (0.0 - 6.00, 6.0 (nm))
TCPA (0 - 60, 60 (min))
ALARM MODE ( ON , OFF)
ALARM BUZZER ( ON , OFF)
A ( 0 -511 (m))
Note: The INITIAL SETTINGS sub menu
B ( 0 -511 (m))
shown here is the one accessed with a
C ( 0 -63 (m))
password, which permits changing of
D ( 0 -63 (m))
settings. If accessed without a password,
in which case "SET" in a menu title is
A ( 0 -511 (m))
replaced with "VIEW" and settings cannot
B ( 0 -511 (m))
be changed.
C ( 0 -63 (m))
D ( 0 -63 (m))
SET
SET COM1 MODE ( LONG RANGE , EXT DISPLAY, DISABLE)
COM SPEED (IEC61162-1, EC61162-2 )
PORT SET COM2 MODE ( EXT DISPLAY , MONITOR, HI LEVEL IF, DISABLE)
SPEED ( I IEC61162-1, EC61162-2 )
SET COM3 (Same as SET COM2.)
SET COM4 MODE ( SENSOR , EXT DISPLAY, DISABLE)
SPEED ( IEC61162-1 , IEC61162-2)
SET COM5 MODE (SENSOR(Fixed)
SPEED ( IEC61162-1 , IEC61162-2)
SET COM6 MODE (SENSOR(Fixed)
SPEED (I IEC61162-1 , IEC61162-2, AD-10)
MODE ( STANDARD , MONITOR, SERVICE, BEACON, DISABLE)
SPEED (4800BPS, 9600BPS, 19.2KBPS, 38.4KBPS , 57.6KBPS)
MODE ( STANDARD , MONITOR, SERVICE, DISABLE)
IP ADDRESS (000.000.000.000 - 255.255.255.255; 172.031.024.001 )
SUB NET MASK (000.000.000.000 - 255.255.255.255; 255.255.000.000 )
PORT NO. (0 - 65535; 10000 )
L/L, COG, SOG
SET
HDG
ROT (Same choices and defaults as HDG)
COM4 ( 1 , 2, 3)
COM5 (1, 2 , 3)
COM6 (1, 2, 3 )
COM4 (1, 2 , 3)
COM5 (1, 2, 3 )
COM6 ( 1 , 2, 3)
AP-1