Figure 1-2 Name Of Each Part (Rear View) - Hitachi HF-W7500 Instruction Manual

(2) Rear view
Serial port (COM1)
Main power switch
AC inlet
Audio port
Upper: LINE IN
Lower: LINE OUT
ACT/LINK lamp
Communication speed lamp
(*1) If a display unit connected with DisplayPort is turned off, the display cannot be detected.
(*2) This slot can not be used because the RAID board is installed.
(*3) By the BIOS setup, you can change the number of the available lanes as follows.
See "5.6 BIOS setup" if you want to change the BIOS setup.
BIOS settings
Setting 1（Default）
Setting 2
(*4) PCI Express x16 connectors is used but the internal connection is equivalent to PCI Express x1 or PCI Express x8.
(*5) PCI Express x4 connectors is used but the internal connection is equivalent to PCI Express x1.
(*6) Serial port (COM2) and External contact port (EXT) are optional ports.
USB3.0 port (2 ports)
DisplayPort (*1)
DVI-D port A
LAN port
Left: LAN1
Right: LAN2
USB3.0 port
(4 ports)

Figure 1-2 Name of Each Part (Rear View)

Slot2
PCI Express x16
PCI Express x8
DVI-D port B
Serial port (COM2) (*6)
External contacts port (EXT) (*6)
Extension slots (From left to right)
Slot1: PCI Express x4 (*2)
Slot2: PCI Express x16 (*3)
Slot3: PCI Express x1 (*3)(*4)
Slot4: PCI Express x1 (*5)
Slot5: PCI
Slot6: PCI
Slot7: PCI
Slot1：PCI Express x4 (*2)
Slot3
PCI Express x1
PCI Express x8
1-6
1. GETTING STARTED