Figure 6-15 Removing A Lithium Battery - Hitachi HF-W7500 Instruction Manual

Industrial computer
Hide thumbs Also See for HF-W7500:
Table of Contents

Advertisement

6. CHECKUP AND MAINTENANCE
(2) Removing a lithium battery
[1] Follow the instructions in "6.3.3 Installing and removing the cover of the equipment" to
remove the cover of the equipment.
[2] Remove the lithium battery from the battery holder as shown in the figure below.
[3] Remove the lithium battery from the BAT connector on the motherboard.
(3) Installing a lithium battery
When you install a lithium battery, follow the above procedure in reverse.
< NOTE >
When you connect a cable, make sure the orientation of the cable is correct and
insert the connector without applying too much force on the connectors.
[1]
Battery holder

Figure 6-15 Removing a lithium battery

6-26
[2]

Advertisement

Table of Contents
loading

Table of Contents