Figure 6-4 Removing The Sata Cables - Hitachi HF-W7500 Instruction Manual

(2) Installing a main memory
 The orientation of a main memory module on a connector is fixed. When you
install a main memory module, make sure the orientation is correct. Otherwise,
failure of the equipment may result.

Do not install main memory modules with different capacities on slot A2 and
slot B2. If you do, the modules may not be recognized.
[1] Follow the instructions in "6.3.3 Installing and removing the cover of the equipment" to
remove the cover of the equipment.
[2] Refer to the figure below and remove the SATA cables from the backboard connectors.
NOTICE

Figure 6-4 Removing the SATA cables

6-13
6. CHECKUP AND MAINTENANCE
Silk printing
SATA1
RAID
connector
connector
Note : When installing the SATA cables,
check the silk printing of the
cables and attach them to the
corresponding connectors.
SATA0
connector