5. SPECIFICATION
(5) Restoring the default settings
When you want to restore all items in the setup menu back to the default settings, follow
the procedure below:
1. Start the setup menu. (See "(1) Starting the setup menu".)
2. Open Exit in the top menu. Move the cursor to Load Setup Defaults and press Enter.
The message "Load default configuration now?" is displayed.
3. Select "Yes" and press Enter.
4. Open Exit in the top menu again. Move the cursor to Exit Saving Changes. Press
Enter. The message "Save configuration changes and exit now?" is displayed.
5. Select "Yes" and press Enter.
This completes the procedure.
5-16