Table of Contents
Advertisement
Name
AC inlet
Power supply
Main power switch
Audio port (LINE IN)
Audio port (LINE OUT)
Serial port (COM1)
(9 pins: RS-232C)
Serial port (COM2)
(9 pins: RS-232C)
(optional)
RAS external contact port
(25 pins: EXT)
(optional)
DVI-D port (Port A)
DVI-D port (Port B)
DisplayPort
PCI Express bus slot
(Slot 1 - Slot4)
PCI bus slot
(Slot 5 - Slot 7)
USB port (USB 3.0)
USB port (USB 2.0)
Table 1-1 Function of Each Part (2/5)
Used for connecting a power cord.
A power supply module with a wide-range input voltage (100 to 240
VAC).
If you press the switch to the 1 position, the power is supplied. If you press
the switch to the 0 position, the power is shut down.
An audio line input.
An audio line output.
Connects a device such as a modem that uses a serial interface.
(See "5.9.1 Connector specifications".)
Connects a device such as a modem that uses a serial interface.
(See "5.9.1 Connector specifications".)
A connector for connecting external contacts. (See "5.9.1 Connector
specifications".)
Connects the cable from the digital interface of a display. (See "5.9.1
Connector specifications".)
Connects the cable from the digital interface of a display. (See "5.9.1
Connector specifications".)
Connects the cable from the digital interface of a display. (See "5.9.1
Connector specifications".)
Used as a slot to insert a PCI Express board.
But the Slot1 can not be used because the RAID board is installed.
Used as a slot to insert a PCI board.
Used to connect a device that uses a USB interface.
Used to connect a device that uses a USB interface.
1-9
1. GETTING STARTED
Function
Advertisement
Table of Contents
