Table of Contents
Advertisement
5. SPECIFICATION
(4) Details of the setup menu
The following tables show the details of the items you can set up in each menu.
Top
menu
Main
System Date
System Time
Drive1
Drive2
Drive3
Boot
Options
System Memory
BIOS Version
Information
(*1) The date and time are reflected in RTC (real time clock) at these of change.
(*2) A setting change to "NMI" gives you more chances of non-maskable interrupt, thereby increasing the possibility of
successful memory dump initiated by the reset button at an error occurrence during OS startup/shutdown.
For information about a memory dump, see "8.2 Collecting a Memory Dump".
Table 5-16 BIOS Setup menu list
Setting item
Reset button function
Quick Boot Mode
Correctable ECC Error
Microcode Version
VBIOS Version
Memory RC Version
ME Firmware Version
(1/3)
Default value
Automatically
recognized
Automatically
recognized
Automatically
recognized
Reset
Disabled
Pass
Automatically
recognized
Automatically
recognized
Automatically
recognized
Automatically
recognized
Automatically
recognized
Automatically
recognized
5-12
Note
When you set the system up for the
first time, be sure to configure these
two items. (*1)
Allocation : Drive bay 1
Allocation : Drive bay 2
Allocation : DVD Drive
Configures the function of the reset
switch.
If you change the setting to NMI (Non-
Maskable Interrupt), you can change
the reset switch to an NMI switch. (*2)
If you change the setting to Enabled,
you can skip the memory check and the
startup time will be shortened.
In normal operation, specify Disabled
for the setting.
Specifies whether to display a message
and pause the startup or to ignore the
error and proceed with the startup
when a Correctable ECC Error is
detected.
-
-
-
-
-
-
Advertisement
Table of Contents
