6.3 Installing and Removing Components
6.3.1 Types and locations of installed components
The figure below shows the types and locations of the components installed in this equipment.
HDD
Main memory slot
(from right to left,
A2 and B2)
Lithium battery
Power supply unit
The cover of the equipment
(*1) This slot can not be used because the RAID board is installed.
(*2) A PCI Express x16 connector is used but the internal connection is equivalent to PCI Express x1.
(*3) A PCI Express x4 connector is used but the internal connection is equivalent to PCI Express x1.
Dust filter
DVD drive
B2
Slot 1 (PCI Express x4) (*1)
Slot 2 (PCI Express x16)
Slot 3 (PCI Express x1) (*2)
Figure 6-1 Types and Locations of Installed Components
A2
6-5
6. CHECKUP AND MAINTENANCE
Front fan
Fan duct
Slot 5, 6, 7 (PCI)
Slot 4 (PCI Express x1) (*3)