Figure 6-5 Installing A Main Memory; Table 6-3 Main Memory Combination List - Hitachi HF-W7500 Instruction Manual

Industrial computer
Hide thumbs Also See for HF-W7500:
Table of Contents

Advertisement

6. CHECKUP AND MAINTENANCE
[3] Make sure the lock on both ends of the connector of the memory slot is open.
[4] Insert the main memory into the connector from directly above the connector.
When the main memory is inserted, you will hear a click and it is locked. Make sure the
lock is completely closed.
On this equipment, only the following combinations are allowed.
The number of
main memory
(3) Removing main memory
Follow the procedure described in "(2) Installing a main memory" in reverse to remove main
memory. Also, be careful when opening locks at both ends of the connector of the memory slot
at the same time, a main memory will be disconnected from the memory slot.
(4) Reconfiguring the memory dump file settings
When you change the capacity of main memory, you must reconfigure the memory dump
collection settings.
When you reconfigure the memory dump collection setting, see "8.2.1 Memory Dump
Confirmation Messages" for details.
Memory slot B2
Memory slot A2

Figure 6-5 Installing a main memory

Table 6-3 Main memory combination list

Memory slot
A2
2
4GB
2
8GB
2
16GB
Memory slot
B2
4GB
8GB
16GB
6-14
Side view
Top view
Total
capacity
8GB
16GB
32GB

Advertisement

Table of Contents
loading

Table of Contents