Table of Contents
Advertisement
(3) Installing an HDD
Follow the procedure described in "(2) Removing an HDD" in reverse to install an HDD.
< NOTE >
・When you pull out an HDD, make sure you do not apply too much force to the
connector. Slowly pull out the hard disk in order not to subject the HDD.
・When you connect an HDD to a connector, do not subject the HDD to shock or
jarring.
・Always install the system disk in drive bay 1. Even if the system disk is
incorrectly installed in the drive bay 2, the OS will start up, so pay attention to
the mounting position of the disk.
・The capacities of HDD1 and HDD2 must be the same. Do not install HDDs
with different capacity.
・After having closed front cover, please confirm that you are locked. Front cover
may open by a shock.
6-17
6. CHECKUP AND MAINTENANCE
Advertisement
Table of Contents
