Table of Contents
Advertisement
3. SETUP
● Windows Server® 2016 setup procedure
Perform the following procedure to set up Windows Server® 2016.
1. Turn on this equipment.
Windows starts running and setup is prepared.
Then, the message "Setup is installing devices. Please wait..." appears, indicating that
installation of the device driver is in progress.
• This processing may take several minutes. Please wait until it is completed.
• After the OS reboots, Setup goes on.
2. The Here's the legal stuff window opens.
• Check the contents, and then click the Accept button.
3. The Get going fast window opens.
• Click Customize.
• Select ON or OFF for settings as needed, and then click the Next button.
4. The Create an account for this PC window opens.
• Type a user name in Who's going to use this PC?.
• Type a password in Enter password in Make it secure.
• Retype the password in Re-enter password.
• Type a hint of password in Password hint.
• Click the Next button.
< NOTE >
Rarely you can not type Japanese when typing a password hint.
In this case, type Japanese by the following method.
•
Move the input point to Who's going to use this PC? and check whether you
can type Japanese. If you can type Japanese, move the input point to
Password hint and check if you can type Japanese.
•
If you can not enter Japanese even if the above correspondence is done,
reset password after setup and enter hint of password.
5. After the setup has been completed, the sign in operation is performed automatically.
3-6
Advertisement
Table of Contents
