Table of Contents
Advertisement
9. TROUBLE SHOOTING
No.6
: %1 denotes the drive bay number. %2 denotes the manufacturer and the model name of the drive.
No.8
: %1 denotes the drive bay number.
No.13
: %1 denotes the message about a record factor. Any of the following message is recorded.
Write debugging information setting is not "Complete memory dump"
Overwrite any existing file setting is disable
Paging file size is insufficient
Memory dump file is not exist or Memory dump file size is insufficient
No.14
: %1 denotes the slot number of the DIMM.
No.15
: %1 records one of the following :
FAN, TEMP, RMTSTDN, MEM, CPU, TEMPLOG, WDT, RAID1, RAID SMART, SMART,
USETIME, RASLOG, INTERNAL – LOGD
No.16
: %1 denotes the slot number of the DIMM. %2 denotes the cumulative single bit error detection
count.
No.17
: %1 denotes the slot number of the DIMM.
No.18
: %1 denotes the function terminated with an error. %2 denotes the error code.
No.19
: %1 denotes the registry key that has an illegal value. %2 denotes the default value of the registry
key.
No.20
: %1 and %2 record one of the following combinations :
Reset signal was input.
PCI Bus Parity Error
Uncorrectable Error at DIMM B2.
Uncorrectable Error at DIMM A2.
No.21
: %1 denotes the power shutdown reason code.
No.22, No.26, No.27, No.28 : %1 denotes the Drive bay No.
%1
%1
9-26
%2
0x9201
0x9202
0x9217
0x9218
Advertisement
Table of Contents
