Installing And Removing The Cover Of The Equipment; Figure 6-2 Removing The Cover Of The Equipment - Hitachi HF-W7500 Instruction Manual

Industrial computer
Hide thumbs Also See for HF-W7500:
Table of Contents

Advertisement

6.3.3 Installing and removing the cover of the equipment

When you install the cover of the equipment, do not put your fingers inside
the cover. If you do, your fingers may get caught and injured.
Before starting to work, see "6.3.2 Before installing or removing components".
(1) Removing the cover of the equipment
[1] Remove the three screws on the rear of the equipment.
[2] Slide the cover to the rear of the equipment.
[3] Lift the cover up.
(2) Installing the cover of the equipment
When installing the cover of the equipment, reverse the procedure described in "(1)
Removing the cover of the equipment." Then install the center screw first, as shown in
Figure 6-2.
CAUTION
[3]

Figure 6-2 Removing the Cover of the Equipment

[1]
6-7
6. CHECKUP AND MAINTENANCE
[2]

Advertisement

Table of Contents
loading

Table of Contents