Table of Contents
Advertisement
10. RAID1
(1) Replacing an HDD with the equipment turned on
1. Back up data.
(See "(2) Backing Up Files" in "4. HARD DISKS DRIVES (HDDs)" in
"PRECAUTIONS".)
2. Close all running applications.
3. Double-click the hardware status icon shown in the notification area of the task bar to
open the hardware status display window. Check defective HDDs on the hardware status
display window.
(Note) This window shows that the HDD in drive bay 2 is defective.
4. Remove the defective HDD from the computer.
(See "6.3.6 Installing and removing an HDD".)
Hardware Status Window
10-8
Advertisement
Table of Contents
