3.5 Selecting input source for Sub
• If FIXED (COMPUTER IN) is selected, the MONITOR OUT setting of
NOTE
STANDBY OUTPUT is invalid.
• If FIXED (HDMI 1) is selected, the HDMI 1 port can be selected as an input
source on the Main projector. When any button to select an input port on the
remote control or the INPUT button on the projector is pressed, the MAIN
INPUT SOURCE dialog will be displayed on screen.
• If FIXED (HDMI 1) is selected, the HDMI 1 port on the Sub projector should
be connected to the HDMI OUT port on the Main projector with a HDMI cable.
The image from the selected port is output from the HDMI OUT port on the Main
projector to the HDMI 1 port on the Sub projector.
• If FIXED(HDMI 1) is selected, HDMI 1 or HDBaseT port can be selected as an
input source on the Main and Sub projectors.
• If FIXED(HDMI 1) is selected, the HDMI OUTPUT setting is invalid.
• If FIXED(HDMI 1) is selected, the HDMI OUT and AUDIO OUT settings of
STANDBY OUTPUT are invalid.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
(continued)
19
STACK menu settings
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG