Christie LWU900-DS User Manual page 11

2.3 Installing the second projector (Set B) - Setting up Set B
3.
Adjust the image size and position of Set B with the ZOOM, FOCUS and
LENS SHIFT features such that the image can be superimposed to the image
of Set A. (Operating Guide
• Fine adjustment of the image size and position afterwards with
NOTE
functions such as KEYSTONE and 3D KEYSTONE does not increase the
image size. You must have the image of Set B completely overlapping the
image of Set A.
• When controlling Set B with the remote control, Set A may also respond to
the remote control. To avoid incorrect operations with the remote control, it
is recommended to operate with the control panel or a wired remote control.
KEYLOCK or REMOTE ID function is also available.
• If using Simple Stack, go to
4.
Display the menu with the MENU button.
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu appears on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display the
STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
7.
Use the ▲/▼ buttons to highlight LIGHT
MODE, and press the ► button to display
the LIGHT MODE dialog.
Highlight DUAL with the ▲/▼ buttons, and
press the ► button.
8.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting.
( 20 )
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
→
Adjusting the
For Simple Stack
→
OPTION menu)
9
(continued)
lens)
users. ( 12 )
(Operating Guide
Installation
→
Using the
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG