Christie LWU900-DS User Manual page 33

5.4 Setting the menu - Inputting image to Sub and Main individually
3.
Use the ▲/▼ buttons to highlight SUB INPUT SOURCE, and press the ►
button to display the SUB INPUT SOURCE dialog.
4.
Use the ▲/▼ buttons to highlight FOLLOW MAIN
UNIT, and press the ► button to complete the
setting. ( 20 )
5.
Press any button to select an input port on the remote control or the INPUT
button of the Main projector. The MAIN INPUT SOURCE dialog is displayed
on screen. Use the ▲/▼ buttons to highlight the port to which the signal cable
is connected, and press the ► button to complete the setting.
LWU755-DS
• If FOLLOW MAIN UNIT is selected, selecting the input source on
NOTE
either the Main or Sub projector automatically sets the other projector to the
same source.
• If FOLLOW MAIN UNIT is selected, LAN cannot be selected.
• When FOLLOW MAIN UNIT is selected, if any button to select an input port
on the remote control or the INPUT button on the Main projector is pressed, the
dialog for selecting the input source is displayed.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
Setting input ports using menu
(continued)
LWU900-DS/LHD878-DS
31
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG