Table of Contents
Advertisement
4.2 Connecting signal cables
There are two methods to input an image to the Sub projector. ( 18-20 )
- Inputting an image from the MONITOR OUT port on Main to Sub.
- Inputting an image to Sub and Main individually.
Inputting an image from Main to Sub
Using MONITOR OUT port
1.
Connect the MONITOR OUT port on Main
to the COMPUTER IN port on Sub with a
computer cable.
2.
Connect the image output device to one of
the input ports on Main.
Using HDMI OUT port
1.
Connect the HDMI OUT port on Main to the
HDMI 1 port on Sub with a HDMI cable.
2.
Connect the image output device to
HDMI 1 or HDBaseT ports on Main.
NOTES for Intellectual Stack
• COMPUTER IN can be used as the input
port for the Main projector in Intellectual Stack.
Do not use other ports for image input.
- You can input component signals to
COMPUTER IN.
NOTES for Simple Stack
• COMPUTER IN can be used as the input
port for the projector that is connected with a
computer cable at its MONITOR OUT port. If
you want to use other input ports, input the
image to Sub and Main individually.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
LWU755-DS
LWU900-DS/LHD878-DS
25
Connecting cables
Main
DISPLAY PORT
VIDEO
WIRELESS
L
DC5V 0.5A
AUDIO IN 2
R
LAN
CONTROL
COMPUTER IN
AUDIO IN 1
REMOTE CONTROL
IN
OUT
AUDIO OUT
MONITOR OUT
Sub
3G-SDI
DISPLAY PORT
VIDEO
WIRELESS
L
DC5V 0.5A
AUDIO IN 2
R
LAN
CONTROL
COMPUTER IN
AUDIO IN 1
REMOTE CONTROL
IN
OUT
AUDIO OUT
MONITOR OUT
Main
3G-SDI
DISPLAY PORT
VIDEO
WIRELESS
L
DC5V 0.5A
AUDIO IN 2
R
LAN
CONTROL
COMPUTER IN
AUDIO IN 1
REMOTE CONTROL
IN
OUT
AUDIO OUT
MONITOR OUT
Sub
3G-SDI
DISPLAY PORT
VIDEO
WIRELESS
L
DC5V 0.5A
AUDIO IN 2
R
LAN
CONTROL
COMPUTER IN
AUDIO IN 1
REMOTE CONTROL
IN
OUT
AUDIO OUT
MONITOR OUT
Connection example
in Intellectual Stack
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG
Advertisement
Table of Contents
