Vca Configuration; Configuring Vca Information (Overlay & Capture) - HIKVISION DS-2DP0818ZIX User Manual

6.3 VCA Configuration

Purpose:
You can do intelligent analysis such as behavior analysis and face capture, etc. with the camera.
Multiple rules can be configured for different requirements.
Note:
VCA is only available for panoramic camera channel.
6.3.1 Configuring VCA Information (Overlay & Capture)
Steps:
1. Enter the VCA configuration interface:
Configuration > VCA > Overlay & Capture
2. Set the display information:
 Display VCA info. on Stream: The green frames will be displayed on the target if in a live view or
playback.
 Display Target info. on Alarm Picture: There will be a frame on the target on the uploaded alarm
picture if the checkbox is checked.
 Display Rule info. on Alarm Picture: The captured target and the configured area will be framed
on the alarm picture.
3. Set the Snapshot:
 You can check the checkbox to upload JPEG image to surveillance center when VCA alarm
occurs.
 You can also set the quality of the picture.
4. Click
User Manual of PanoVu Series Network Camera
Figure 6-17 Overlay & Capture
to save the settings.
84