Appendix 9 Alarm In/Out Connections - HIKVISION DS-2DP0818ZIX User Manual

Appendix 9 Alarm In/Out Connections

Note:
This section is only for the cameras with alarm in/out functions.
The camera can be connected with alarm inputs (0~5VDC) and alarm outputs. Refer to the following
diagrams for alarm output:
Dome
Relay Output
The alarm provides the relay output (no voltage), and the external power supply is required when it
connects to the alarm device.
 For DC power supply (left diagram), the input voltage must be no more than 30VDC, 1A.
 For AC power supply, the external relay must be used (right diagram) to prevent damages to the
camera and avoid risk of electric shock.
User Manual of PanoVu Series Network Camera
DC Load
OUT(n)
Dome
+
DC -
Relay Output
OUT(n)
Diagram (left)
Figure A.9.1 Alarm Out Connections
GND OUT
30VDC
1A
OUT(n)
OUT(n)
Diagram(right)
JQC- 3FG
Relay
(10 A 250VAC)
～220V AC
L N
115