Activating The Camera - HIKVISION DS-2DP0818ZIX User Manual

Network Camera

1.2.2 Activating the Camera

Purpose:
You are required to activate the camera first before you can use the camera.
Activation via web browser, activation via SADP, and activation via client software are supported. In the
following sections, activation via web browser and activation via SADP will be taken as examples. You
may refer to the user manual of the camera for details of activation via client software.
 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to enter the
activation interface.
Note:
The default IP address of the camera is 192.168.1.64.
3. Create a password and input the password into the password field.
User Manual of PanoVu Series Network Camera
Network Cable
Switch or Router
Connecting via an Switch or a Router
Figure 1-2
Activation Interface (Web Browser)
Figure 1-3
Network Cable
PC
3