Configuring Dst (Daylight Saving Time); Vca Resource; About - HIKVISION DS-2DP0818ZIX User Manual

Note:
The Baud rate, PTZ Protocol and PTZ Address parameters of the camera should be exactly the same
as those of the control device.

7.1.4 Configuring DST (Daylight Saving Time)

Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period of a year, you can
turn this function on. The time will be adjusted automatically when the Daylight Saving Time (DST)
comes.
Steps:
1. Enter the DST settings interface:
Configuration > System > System Settings > DST
2. Check
3. Set the date of the DST period.
4. Click

7.1.5 VCA Resource

VCA resource offers users options to enable certain VCA function and disable others when several VCA
functions are available. It helps allocate more resources to the wanted functions.
Steps:
1. Enter the VCA Resource interface: Configuration > System settings > VCA Resource
2. Select the desired VCA option.
3. Save the settings. A reboot is needed for the settings to take effect.
Note:
The function may not be supported by some camera models.

7.1.6 About

Click View License, you can check Open Source Software Licenses.
User Manual of PanoVu Series Network Camera
to enable the DST function.
to save the settings.
Figure 7-7
DST Settings
95