Configuring Network Settings; Basic Settings - HIKVISION DS-2DP0818ZIX User Manual

 Display POS Information: Enable the function, feature information of the detected target is
dynamically displayed near the target in the live image.
 Image Format: The captured pictures can be saved in different format. JPEG and BMP are
available.
Record File Settings: Set the saving path of the video files.

 Record File Size: Select the packed size of manually recorded and downloaded video files. The
size can be set to 256M, 512M or 1G.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files in
interface.
Picture and Clip Settings: Set the saving paths of the captured pictures and clipped video files.

 Save snapshots in live view to: Set the saving path of the manually captured pictures in
 Save snapshots when playback to: Set the saving path of the captured pictures in
 Save clips to: Set the saving path of the clipped video files in
Note:
You can click
3. Click

2.2 Configuring Network Settings

2.2.1 Basic Settings

Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over network. IPv4 and
IPv6 are both supported.
Steps:
1. Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP
User Manual of PanoVu Series Network Camera
interface.
interface.
to change the directory for saving video files, clips and pictures.
to save the settings.
13
interface.