Configuring Alarm Output - HIKVISION DS-2DP0818ZIX User Manual

6.1.4 Configuring Alarm Output

Steps:
1. Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2. Select one alarm output channel in the Alarm Output dropdown list.
3. Set a name in
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The delay
time refers to the time duration that the alarm output remains in effect after alarm occurs.
5. Click
configuration is the same as the settings of the arming schedule for motion detection. Refer to Step
5 in Section 6.1.1 Configuring Motion Detection.
User Manual of PanoVu Series Network Camera
Linkage Method
Figure 6-9
tab to enter the arming schedule setting interface. The time schedule
Alarm Output Settings
Figure 6-10
for the alarm output (optional).
76