Hdd Management - HIKVISION DS-2DP0818ZIX User Manual

the following categories: upper case letters, lower case letters, numbers, and special characters.)
in order to increase the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
4. If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and click
Format to start initializing the disk.
5. Click

5.1.2 HDD Management

If the memory card is inserted in the device or NAS (Network-Attached Storage) is added, enter HDD
Management interface to configure the storage status.
Steps:
1. Enter the HDD settings interface
Configuration > Storage > Storage Management > HDD Management,
You can view the capacity, free space, status, type and property of the disk.
2. If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and click
Format to start initializing the disk.
3. When the initialization completed, the status of disk will become Normal.
Define the Quota for Record and Pictures
Steps:
1. Input the quota percentage for picture and for record.
2. Click Save and refresh the browser page to activate the settings.
User Manual of PanoVu Series Network Camera
to save the settings.
Storage Management Interface
Figure 5-2
View Disk Status
Figure 5-3
60