Power-Up Action - HIKVISION DS-2DP0818ZIX User Manual

Notes:
 If you use third party VMS software, contact technical support of our branch for camera firmware.
 For detailed information about client software of our company, refer to the user manual of the
software. This manual mainly introduces accessing to the camera by web browser.

1.5 Power-up Action

After the power is applied, the camera will perform self-test actions. It begins with lens actions and
then pan and tilt movement. After the power-up self-test actions, the information shown in Figure 1-17
will be displayed on screen for 40 seconds.
The system information displayed on the screen includes the camera model, address, protocol, version
and other information. The COMMUNICATION refers to the baud rate, parity, data bit and stop bit of
the camera. e.g., "2400, N, 8, 1" indicates the camera is configured with the baud rate of 2400, no
parity, 8 data bits and 1 stop bit.
User Manual of PanoVu Series Network Camera
iVMS-4200 Live View Interface
Figure 1-16
Model
Address
Communication
Software Version
Camera Version
Language
Power-up Information
Figure 1-17
XX-XXXXXX-X
0
0000,0,0,0
Vx.x.x
Vx.xx
English
11