Table of Contents
Advertisement
5.1.2 HDD Management
If the memory card is inserted in the device or NAS (Network-Attached Storage) is added, enter
HDD Management interface to configure the storage status.
Steps:
1. Enter the HDD settings interface
Configuration > Storage > Storage Management > HDD Management,
You can view the capacity, free space, status, type and property of the disk.
2. If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk and
click Format to start initializing the disk.
When the initialization completed, the status of disk will become Normal.
Define the Quota for Record and Pictures
Steps:
1. Input the quota percentage for picture and for record.
2. Click Save and refresh the browser page to activate the settings.
Note:
Up to 8 NAS disks can be connected to the camera.
User Manual of PanoVu Series Network Camera
Figure 5-2 Storage Management Interface
Figure 5-3 View Disk Status
Figure 5-4 Quota Settings
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
57
Advertisement
Table of Contents
