Input Audio Routing/Controls - Cobalt Digital Inc BBG-1022-2FS Product Manual

Setup/Operating Instructions
Table 3-2 BBG-1022-2FS Function Submenu List — continued

Input Audio Routing/Controls

Note:
Input Audio Routing/Controls tab has identical independent controls for both Path 1 and Path 2 using the Path 1 /
Path 2 sub-tabs. Therefore, only the Path 1 controls are shown here. Set controls for other path using the respective
sub-tab.
• • •
Path 1
Emb Ch 1 – 6
AES Ch 1-2
BBG1022-2FS-OM (V1.3)
Input Audio
Crosspoint
Bus Ch 1
Path 1 16-Ch Internal Bus
Bus Ch 2
Bus Ch 3
Channel Delay Controls)
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
Silence
•
or Mute
•
Bus Ch 16
BBG-1022-2FS PRODUCT MANUAL
BBG-1022-2FS Function Menu List and Descriptions
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the 16-channel internal
bus (which is used for all audio processing).
All audio inputs are transferred through the
device via each path's 16-channel Internal Bus
(Bus Ch 1 thru Bus Ch 16).
The example above shows various Source
selections that direct Emb Ch 1 thru Ch 6 and
(Gain, Mute, Bulk and
AES Ch 1 and Ch 2 onto the device internal bus
(unused bus channels can be set to Silence or
Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
3-19