Cobalt Digital Inc BBG-1022-2FS Product Manual page 92

3
Table 3-2 BBG-1022-2FS Function Submenu List — continued
• Preset Save/Load Controls
3-62
BBG-1022-2FS Function Menu List and Descriptions
(continued)
• Select Preset: drop-down allows a preset saved above to be
selected to be loaded or deleted (in this example, custom preset
"IRD Rcv122").
• Load Selected Preset button allows loading (engaging) the
selected preset. When this button is pressed, the changes called
out in the preset are immediately applied.
Note: Controls below that modify or delete presets are grayed-out
(inactive) when Save/Delete button is in Protected mode. To
use these controls, make certain Protected is not enabled.
• Update - Rename - Delete Selected Preset buttons allow
selected preset to be updated (take in current custom settings), be
renamed, or be deleted. A Confirm prompt appears in all cases.
• Delete All Presets button allows a delete of all stored presets.
(This is useful if all presets are to be replaced by a new Presets
.bin file.)
• Load Factory Defaults button allows loading (recalling) the
factory default preset. When this button is pressed, the changes
called out in the preset are immediately applied.
Note: Load Factory Defaults functions with no masking. The Preset
Layer Select controls have no effect on this control and will
reset all layers to factory default.
• Download Presets saving the preset files to a folder on the
connected computer.
• Upload Options checkboxes function as follows:
• Delete All Presets on Upload clears all stored presets, and
then replaces or adds any presets as defined in the uploaded
Presets .bin file. (This is useful to establish a "clean slate" and
remove any presets that may no longer be desired.)
• Delete Duplicate Presets on Upload clears stored presets
bearing the same name as currently stored presets. (This avoids
dual iterations of same preset name (plain and duplicate using
"*" marking), and avoids possibility of "stale" presets no longer
desired from appearing as a choice.)
• Load Saved Settings on Preset Upload makes certain any
local card settings card state is retained following a preset
upload. When checked, a preset within the upload is invoked
only when specifically selected and invoked.
Note: Any combination of checkboxes can be checked or
unchecked (enabled or disabled) as desired.
BBG-1022-2FS PRODUCT MANUAL BBG1022-2FS-OM (V1.3)